组合使用关键词、标准类型、状态与 ICS 分类，快速定位所需国家标准。
找到 943 条
GB/T 11026.10-2019
Electrical insulating materials—Thermal endurance properties—Part 10: Accelerated determination of relative thermal endurance using analytical test methods(RTEA)—Instructions for calculation based on activation energy
GB/T 2423.35-2019
Environmental testing—Part 2:Tests and guidance—Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests
GB/T 2423.10-2019
Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal)
GB/T 2423.63-2019
Environmental testing—Part 2:Test methods—Test: combined temperature(cold and heat)/low air pressure/vibration（mixed mode）
GB/T 2423.5-2019
Environmental testing—Part 2: Test methods—Test Ea and guidance: Shock
GB/T 23901.1-2019
Non-destructive testing—Image quality of radiographs—Part 1: Determination of the image quality value using wire-type image quality indicators
GB/T 32065.9-2019
Environmental test methods for oceanographic instruments—Part 9:Mould test
GB/T 32065.15-2019
Environmental test methods for oceanographic instruments—Part 15：Hydrostatic pressure test
GB/T 32065.14-2019
Environmental test methods for oceanographic instruments—Part 14 : Vibration test
GB/T 5170.19-2018
Inspection methods for environmental testing equipments—Part 19:Combined temperature vibration(sinusoidal) testing equipment
GB/T 5170.16-2018
Inspection methods for environmental testing equipments—Part 16：Centrifugal machines for constant acceleration test
GB/T 5170.15-2018
Inspection methods for environmental testing equipments—Part 15：Hydraulic vibrating type system for vibration(sinusoidal) test
GB/T 5170.13-2018
Inspection methods for environmental testing equipments—Part 13: Mechanical vibrating type system for vibration(sinusoidal) test
GB/T 37167-2018
Particle—Separation and measurement of trace magnetic materials(elements) in inorganic powder
GB/T 37166-2018
Non-destructive testing—Test method of composite materials for industrial computed tomography (CT)
GB/T 37158-2018
Non-destructive testing—Test method for measuring the maximum detectable steel thickness by industrial computed tomography(CT)
GB/T 37143-2018
Maturity testing for electric and electronic products
GB/T 37122-2018
Non-destructive testing—Phantom of maximum detectable steel thickness for industrial computed tomography(CT)
GB/T 37121-2018
Non-destructive testing—Crack phantom for industrial computed tomography (CT) testing
GB/T 31057.3-2018
Granular materials—Physical properties—Part 3: Fluidity index