GB/T 25962-2010
高速条件下汽车轮毂轴承润滑脂漏失量测定法
Standard test method for determining the leakage tendencies of automotive wheel bearing grease under accelerated conditions
- 实施日期
- 2011-05-01
- ICS 分类
- 75.100
组合使用关键词、标准类型、状态与 ICS 分类,快速定位所需国家标准。
找到 145 条
GB/T 25962-2010
Standard test method for determining the leakage tendencies of automotive wheel bearing grease under accelerated conditions
GB/T 13377-2010
Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary stoppered pyknometer and graduated bicapillary pyknometer methods
GB/T 7324-2010
General purpose lithium lubricating grease
GB/T 6538-2010
Determination of apparent viscosity of engine oils using the cold-cranking simulator
GB 23971-2009
Heat transfer fluids
GB/T 23800-2009
Heat transfer fluids - Determination of thermal stability
GB/T 7602.3-2008
Determination of T501 oxidation inhibitor content in transformer oil or turbine oil - Part 3: Infrared spectroscopy method
GB/T 7602.2-2008
Determination of T501 oxidation inhibitor content in transformer oil or turbine oil - Part 2: Liquid chromatography
GB/T 7605-2008
Detemination of clemulsibility characteristics of turbine oils in service
GB/T 7602.1-2008
Determination of T501 oxidation inhibitor content in transformer oil or turbine oil - Part 1: Spectrophotometric method
GB/T 7601-2008
Determination of water content for transformer and turbine oils in service by gas chromatographic method
GB/T 7598-2008
Determination of water-soluble acid in transformer oils in service
GB/T 7596-2008
In-service quality criteria of turbine oils used in power plants
GB/T 7595-2008
Quality of transformer oils in service
GB/T 7323-2008
Extreme pressure lithium lubricating grease
GB/T 491-2008
Calcium lubricating grease
GB/T 3498-2008
Petrolum products - Determination of dropping point of lubricating greases (wide temperature range )
GB/T 7631.1-2008
Lubricants,industrial oils and related products(class L) - Classification - Part 1:General
GB/T 5018-2008
Standard test method for determining corrosion preventive properties of lubricating greases
GB/T 11143-2008
Standard test method for rust-preventing characteristics of inhibited mineral oil in the presence of water