GB/T 8152.7-2006
铅精矿化学分析方法 铜量的测定 火焰原子吸收光谱法
Methods for chemical analysis of lead concentrates―Determination of copper content―Flame atomic absorption spectrometric method
- 实施日期
- 2007-02-01
- ICS 分类
- 77.060
组合使用关键词、标准类型、状态与 ICS 分类,快速定位所需国家标准。
找到 150 条
GB/T 8152.7-2006
Methods for chemical analysis of lead concentrates―Determination of copper content―Flame atomic absorption spectrometric method
GB/T 8152.4-2006
Methods for chemical analysis of lead concentrates―Determination of zinc content―EDTA titration method
GB/T 8152.12-2006
Methods for chemical analysis of lead concentrates―Determination of cadmium content―Flame atomic absorption spectrometric method
GB/T 8152.11-2006
Methods for chemical analysis of lead concentrates―Determination of mercury content―Atomic fluorescence spectrometer method
GB/T 4157-2006
Laboratory testing of metals for resistance to specific forms of environmental cracking in H2S environments
GB/T 20122-2006
Corrosion of metals and alloys -- Evaluation of stress corrosion cracking by the drop evaporation test
GB/T 20121-2006
Corrosion of metals and alloys -- Corrosion tests in artificial atmosphere -- Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)
GB/T 20120.2-2006
Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 2: Crack propagation testing using precracked specimens
GB/T 20120.1-2006
Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing
GB/T 13448-2006
Test methods for Prepainted Steel Sheet
GB/T 5776-2005
Corrosion of metals and alloys-Guidelines for exposing and evaluating metals and alloys in surface sea water
GB/T 19747-2005
Corrosion of metals and alloys-Determination of bimetallic Corrosion in outdoor exposure corrosion tests
GB/T 19746-2005
Corrosion of metals and alloys-Alternate immersion test in salt solution
GB/T 19745-2005
Corrosion tests in artificial atmosphere at very low Concentrations of polluting gas(es)
GB/T 15970.8-2005
Corrosion of metals and alloys-Stress corrosion test Part8:Preparation and use of specimens to evaluate weldments
GB/T 19292.4-2003
Corrosion of metals and alloys--Corrosivity of atmospheres--Determination of corrosion rate of standard specimens for the evaluation of corrosivity
GB/T 19292.3-2003
Corrosion of metals and alloys--Corrosivity of atmospheres--Measurement of pollution
GB/T 19292.2-2003
Corrosion of metals andalloys--Corrosivity of atmospheres--Guiding values for the corrosivity categories
GB/T 19292.1-2003
Corrosion of metals and alloys--Corrosivity of atmospheres--Classification
GB/T 19291-2003
Corrosion of metals and alloys--General principles for corrosion testing