GB/T 43368-2023
宇航用分离脱落连接器通用规范
General specification for separable and break-off connectors for aerospace
- 实施日期
- 2024-03-01
- ICS 分类
- 31.220.10
组合使用关键词、标准类型、状态与 ICS 分类,快速定位所需国家标准。
找到 36 条
GB/T 43368-2023
General specification for separable and break-off connectors for aerospace
GB/T 41036-2021
General specification for super high-low temperature circular electrical connector for space applications
GB/T 5095.2507-2021
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-7: Test 25g: Impedance, reflection coefficient, and voltage standing wave ratio (VSWR)
GB/T 5095.2505-2021
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-5:Test 25e: Return loss
GB/T 5095.2504-2021
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-4: Test 25d: Propagation delay
GB/T 5095.2503-2021
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-3: Test 25c: Rise time degradation
GB/T 5095.2502-2021
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-2: Test 25b: Attenuation (insertion loss)
GB/T 5095.2501-2021
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-1: Test 25a: Crosstalk ratio
GB/T 5095.2307-2021
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-7: Screening and filtering tests—Test 23g: Effective transfer impedance of connectors
GB/T 5095.2304-2021
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-4: Screening and filtering tests—Test 23d: Transmission line reflections in the time domain
GB/T 5095.2303-2021
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-3:Screening and filtering tests—Test 23c:Shielding effectiveness of connectors and accessories—Line injection method
GB/T 39339-2020
Design rules and methods for areospace electrical connectors
GB/T 39341-2020
General specification for high speed transmission connectors for aerospace
GB/T 5095.2509-2020
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-9: Signal integrity tests-Test 25i: Alien crosstalk
GB/T 5095.2506-2020
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-6:Test 25f:Eye pattern and jitter
GB/T 13536-2018
Connectors for aircraft ground electrical supplies
GB/T 34989-2017
Connectors—Safety requirements and tests
GB/T 11313.29-2015
Radio frequency connectors—Part 29: Sectional specification for miniature radio frequency coaxial connector(type 1.0/2.3)with screw, snap-on, push-pull or quick-lock,slide-in (rack and panel applications)mechanism with characteristic impedance 50Ω for 50Ω and 75Ω applications
GB/T 15157.2-2015
Connectors for frequencies below 3 MHz for use with printed boards—Part 2:Detail specification for two-part connectors with assessed quality,for printed boards,for basic grid of 2.54 mm with common mounting features
GB/T 18290.5-2015
Solderless connections—Part 5: Press-in connections—General requirements, test methods and practical guidance